.the g3 is here

Drawing from the years of research, development and learnings from the iterations of G1 and G2 and our enduro riding platforms, the G3 represents the embodiment of our origins and the reason the company started - removing complexity from the riding experience and using simple design and the unequivocal principles of physics to improve suspension performance through the gnarliest of terrain.

During testing the bikes showed they could simply pull away from other DH bikes on rough sections and increased grip under braking meant racers were redefining the definition of late in “late braking”

When this was relayed to Rob the design brains behind Zerode - he simply said “of course they do - it's physics”

The G3 in attack mode.

.The physics behind the performance

At the heart of all our bikes is the concept of Low Unsprung Mass and the G3 leverages this to its full extent. 

Unsprung Mass is the mass of every component unsupported by the bike's suspension that needs to move/rotate when the wheel hits a bump;  wheel, tyre, some of the rear stays, brakes, and of course cluster and derailleurs.

When the rear wheel hits an obstacle we want it to react in a way that minimises the disturbance to the chassis and rider. Thus maximising grip, minimising rider fatigue and reducing resistance to motion.

The lower the unsprung mass the less disturbance is transferred to the chassis and rider.

This results in more grip, the ability to hold higher speeds through rough sections, less fatigue and a more stable ride.

Removing the weight of the cluster and derailleur and moving this to a low centralised position in the gearbox has a significant impact on unsprung weight and suspension performance.

Some may argue the weight of a modern cluster and derailleur is relatively low, but as a ratio to  the other unsprung components, a cluster and derailleur can easily make up 15% of the overall unsprung mass of a traditional bike.


In a world of incremental gains, a 15% improvement in unsprung mass and suspension performance is huge.

.The spec


  • High pivot

  • Mullet

  • Pinion C1.6 gearbox

  • Gates Carbon Drive Belt

  • Short (435 reach), Medium (460 reach), Long (480 reach)

  • 63 degree head angle

  • 440mm chainstay

  • 200mm travel


our 2nd and final run of pre-orders has sold out again

please fill out the form below to stay up to date with all things G3 and be notified when orders open